You are working at a frame relay provider as the senior network engineer. One of your customers has two PVCs and they are running a lot of TCP and RTP sessions through your frame relay network. The PVCs only have a CIR of 64kbps and you have plenty of CPU power on router Compact and Decrease. Let's see what you can sqeeze out of those packets...
c3640-jk9s-mz.124-16.bin
You need to register to download the GNS3 Topology File. (Registration is Free!)
Hi Owen,
Thanks for your comment. You are right about the frame-relay mappings...stupid mistake ;D Just removed this.
About the loopback interfaces, I added those so you can create a static route for each loopback and use a different PVC but we can also use the IP addresses on the physical interfaces so I removed this as well.
I like to keep things simple so thanks for your help!
Rene
Good work finding a couple of useful commands that aren't really intuitive in the command tree. People studying for NP or IE will get good use out of the Config Guide for this one.
A couple of suggestions:
1. I don't see what the loopback interfaces have to do with compression. I'd consider getting rid of those goals.
2. Point-to-point interfaces don't support map commands, which the last two bullet points imply should be used. I think this works better for teaching by using point-to-point subinterfaces, so I'd keep it that way and change the wording. Going to physical interfaces and using map commands wouldn't be as interesting.
