EIGRP over Frame-Relay with Sub-interfaces

Scenario:

A couple of stooge network engineers are trying to configure EIGRP over the frame-relay network. They read all about frame-relay, EIGRP and split-horizon and decided it sounded like a good idea to use sub-interface. Unfortunately things are not working as they should. Do you think you can help them out?

Goal:

• All IP addresses have been preconfigured for you as specified in the topology picture except for router Moe.
• Every router has a loopback0 interface:
  Moe: 1.1.1.1 /24
  Curly: 2.2.2.2 /24
  Larry: 3.3.3.3 /24
• You are not allowed to make any changes to the frame-relay configurations.
• Configure a sub-interface on router Moe for each PVC.
• Configure EIGRP AS 123 on all routers and advertise the loopback interfaces.
• Ensure router Curly and Larry can see each other's loopback interfaces. Test this by sending a ping that is sourced from the loopback0 interfaces and destined for the other loopback0 interface.

IOS:

c3640-jk9s-mz.124-16.bin

Topology:

You need to register to download the GNS3 Topology File. (Registration is Free!)