EIGRP Debug AS number

gotcha!!!

Jack(config-router)#*Mar 1 001:27.271: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 12: Neighbor 192.168.12.2 (FastEthernet0/0) is up: new adjacency

donot want to spoil fun, hence not revelaing the way.

Njoi
Shoeb

good job!

Found it!!
Cool command for solving this problem.

nice

totally stumped - tried every iteration of the debug ip eigrp and debug eigrp I could think of

I can wireshark it in oh, 10 seconds - but I am not finding an appropriate debug command - the closest I get is debug eigrp packet, which gives me the hellos I'm sending out, but not ones I'm receiving - I can only presume they're being discarded because the AS is configured wrong -

ugh

Hint: If there is an AS mismatch, received eigrp packets are silently discarded, so you will not see them using debug eigrp commands

ach - we'll I tried multiple ip packet debugs too - and tried debugging with an ACL and debuging multicast packets and eigrp without eigrp config - breaking my heart

ok - ran it by my coworker and after about 2 hrs he got the answer - I googled like heck and ran searches thru Safari books - that was just gruesome though - LOL

seems like you had some fun looking for the answer

This gave me a really hard time!!!!
Nice

glad you liked it

Great lab!
I found very useful info while looking for answer.

Hi

Ok so i think i got it figured out how can i find ot if i am correct?

Thanks for a great lab took me 2 hours to figure this out

For now just check the config on the other router to see the AS number. I'll have to record the video for this so you can see how I'm doing it

I have searched for the answer but nothing. Can you give or email it to me ?

I got it and resolved the case with undocumented debug command
This lab is quite challenging.

Hi Rene,
How do you load the lab or topology (you said it is preconfigured) into GRS and start working on it?
Thank you
Koami

Sorry, I mean into GNS3

Hi Koami,

Did you see my mail?

Rene

Hi Rene,
Can you please send the the whole list of written solution so that I can print it out. Your video solutions are great but I need to have an Internet connection everytime I need some help. I would be a great help.

syedal26@yahoo.co.uk
Thanks,
Syed

Nice LAB !!!

You are welcome, thanks for your comment.

Can anyone send a whole list of written solution to me as it will be easy to practise.. Thanks.. EMail me at syedal26@yahoo.co.uk

It will probably take a long time before this will happen what about the video? I walk you through the configuration there.

The videos are great but its just that I am practising at a place where there is no internet at the moment n if i can grab something on the paper it would be much easier for me to practise. So I would request if you can start off with few solutions at your convenience and update it whenever you can.
AGAIN its just a request. What all you are doing here should be enough for people like me and I appreciate your help so far.
Looking forward to hear from you soon.

Thanks.

Ah I see...so you would like to see the configurations together with some explanations of how/why i'm doing it?

Yes please.... Thanks for helping me out.,.. Would appreciate if you can send me an email @
syedal26@yahoo.co.uk

How do I run the .cfg file in GNS3

The .CFG files contain the configuration of the routers. The .NET file is the actual topology.

Got it, May be I am better user of google.. got it in 5 mins

Rene, from where u get these ideas?? Nice lab.. thanks..

Most of the labs I create after reading books or googling around for information

That was extremely entertaining! Thanx!

Hi Rene,

I didn't expect this lab to be that challenging, but it was good exercise.

i was able to find AS number by using access-lists.

Thanks,

How do i go about opening this file? When i unzip the files, i only see the cfg files for the routers? When is the *.net file?

Good idea Rene to debug such a issue

hey brozzz don't get tension here we got a command for that

#debug ip packet detail dump

after that here will u r next side autonomuse number in hex and than convert it .
thankshere

I have to admit that I had to check your video for the answer Renee,
this one is really tough.

I also added the conditional debug before enabling the debug access-list. It's not necessary in this lab, but it could be useful in the production environment.

HI Rene, I am ccna Certified and now Preparing for CCNP ROute. Your labs are always helpful so I am at your website now.. I worked out on your Lab DebugEigrpAS. I configured it in right way .. but i did not understand why you use Access-List though the objective of the Engineer can be fulfilled only by giving #debug ip packet dump

please make me understand and clear my confustion..
thanks in advance...

Sanjeev K Rana

great lab Rene thanks

Keep it up Rene. Am leaving a comment in this lab but it goes to all ur labs also.
Maybe its a small action from your side or sometime u r fed up of posting these wonders, but for us out here, its a huge kick in enhancing our knowledge. Thx. Cheers

Thanx.. good work m8