Scenario:
A small company selling physical security solutions has asked for your help with their network. They own two routers running RIP and it seems the switch in the middle is running amok when it receives multicast traffic. The company doesn’t have any budget so they ask you to solve the problem without replacing the switch.
Goal:
- All IP addresses have been preconfigured for you.
- Both routers have a loopback interface as following:
Vault: 1.1.1.1/24
Safe: 2.2.2.2/24
Configure RIP version 2 on both routers, achieve full connectivity for all networks (including the loopbacks). - You are not allowed to send RIP packets by multicast or unicast.
IOS:
c3640-jk9s-mz.124-16.bin
Topology:
Video Solution:
Configuration Files
You need to register to download the GNS3 topology file. (Registration is free!)Once you are logged in you will find the configuration files right here.
Do you want your CCNA or CCNP Certificate?
The How to Master series helps you to understand complex topics like spanning-tree, VLANs, trunks, OSPF, EIGRP, BGP and more.
Written by René Molenaar - CCIE #41726
cant you just change the version RIP to version 2 and then send/recieve only in version 1?
That would work too but the task says "Configure RIP version 2 on both routers" 😉
ip rip v2-broadcast command on the particular interface.