DHCP Server

Scenario:

You are a trainee and studying for your CCNA certification. Your boss asks you if you can configure a DHCP server for some wireless clients. Confident as you are you take one of your routers and start typing in commands...

Goal:

• The IP address on router Bliss has been preconfigured for you.
• Configure a DHCP pool on router Bliss called "VAULT" with the following configuration:
• Clients should use the DNS server with IP address 1.1.1.1.
• Clients should use network 192.168.12.0 /24.
• Clients should not use the 192.168.12.10 - 20 range.
• Cliends should renew their IP address after 2 hours.
• Configure router Bliss so it does not respond to BOOTP.
• Configure router Bliss so it stores DHCP bindings in flash.
• Configure router Ignorance so it receives an IP address through DHCP.

IOS:

c3640-jk9s-mz.124-16.bin

Topology:

Video Solution:

You need to register to download the GNS3 Topology File. (Registration is Free!)