Hi Folks!
Today i’ve been uploading some of the EIGRP (Enhanced Interior Gateway Routing Protocol pffew) labs that I didn’t convert from my notes/paper/notepad to some nice GNS3 labs. I believe these will be helpful to you when you are studying for your CCNA or perhaps CCNP. Some of the labs will teach you the basics like how to let EIGRP only send unicast traffic or how to enable MD5 authentication.
Some of the more advanced ones show you how to play around with load balancing over (un)equal cost paths and will teach you more about the advertised and feasible distance which EIGRP uses. If that’s not enough you can mess around with running EIGRP over a Frame-Relay point-to-multipoint setup or do some summarization!
The last one for today is the EIGRP Stub with a leak map…I guess if you want to use OSPF names you could kinda call this the “Not So Stubby” EIGRP version đŸ˜‰ Hopefully you have fun playing around with these labs…I got a few more coming. There will be plenty of labs to cover the “routing” part of the CCNP. If you think you know enough about EIGRP give the “Troubleshooting” lab a try.
Have fun!
Rene
The How to Master series helps you to understand complex topics like spanning-tree, VLANs, trunks, OSPF, EIGRP, BGP and more.
Written by René Molenaar - CCIE #41726
Thanks for you work!