Hi folks!

I just uploaded a brand new EIGRP Troubleshooting lab which pretty much covers all the nasty things that can happen to EIGRP. It's a preconfigured configuration with a bunch of routers and the goals are basically 'trouble tickets'. If you think you are good at EIGRP then i challenge you to give it a go, see if you can solve it without using show run but only commands like 'show eigrp' , 'show ip route' and the appropiate 'debug' commands. This will teach you exactly the skills you need to troubleshoot networks in real life, beat the CCNP TSHOOT exam or troubleshooting skills needed for a CCIE.

This one took a lot more work to create then the other labs, since I had to think about creating scenarios without messing up the previous configurations.

Hopefully you like it, please let me know what you think of it...there's no video solution / final config at this moment but questions can of course be asked in the forum :)

Take care and good luck!

Rene

Hello all,

I noticed from all your comments that some of the OSPF Network type configs are incorrect. I'll try to fix these ASAP but i'm busy right now teaching...(I need to make a living as well ;)

The good news is I'm teaching CCNP so soon i'll be adding all ROUTE / TSHOOT labs you can use to beat those exams!

Take care & good luck labbing!

Rene

Hello everyone!

I decided to start "upgrading" all the current labs with startup-configs, final configs and videos showing you how to do the configuration.

So far I managed to do a couple of the OSPF ones, but i'll be adding configs/videos for all labs on the site.

Once this is done I'll start working on new labs...

Let me know what you think of it!

Rene

Hi everyone!

I posted this on my main site, but I think some of you might be interested in this.

People every now and then ask me how they should start studying Cisco, so I decided to wrote an article about it. You can read it here:

Cisco Certifications

Hello all!

I hope you still have plenty of labs to do, I'm really busy at this moment teaching Wireless and doing other work. Next week I got more time to create labs.

I noticed some people didn't receive their login details but their server blocked e-mails from the gns3vault webserver. This happened because the PTR-record wasn't configured correctly so the reverse DNS check failed. It's fixed now so it won't happen again.

If you tried to register and you didn't get a response mail...I'm very sorry, please let me know and i'll resend them to you.

I've got some NAT (we don't have any NAT labs at the moment) labs in my mind, some multicast...even some more MPLS and we definitely need QOS labs....Hopefully I got time next week to get it done!

For now, good luck with the other labs ;)

PS - If you configured the 'basic' config with IP addresses and such, please share them...i'll upload them to the site so it will save time for other people.

Take care!

Rene